You have the keys. The flat is empty, the walls smell faintly of fresh paint, and you are standing in a living room that looks enormous compared to the showroom. Then the first renovation quote lands in your inbox and suddenly the living room looks less like a home and more like a second downpayment.
This is the moment most first-time homeowners in Singapore discover the real shape of their finances. You spent months comparing HDB loan versus bank loan, checking your CPF Ordinary Account balance, working out the resale levy, and rehearsing the downpayment arithmetic. Renovation was the line item you vaguely pencilled in as "maybe $30,000". Understanding HDB renovation cost in 2025 — properly, trade by trade — is what separates a controlled project from one that quietly runs 40 per cent over budget.
This guide breaks down what a 3-room, 4-room and 5-room HDB flat actually costs to renovate this year, what each trade charges, which HDB rules add cost, and where spending genuinely holds value when you eventually sell.
A note on the numbers: every figure below is an indicative market range reflecting typical quotes seen across Singapore's renovation sector — not a quotation. Actual pricing depends on scope, specification, flat condition, and which contractor you appoint. Always obtain at least three itemised written quotes before committing.
Why Renovation Is the Budget Line Nobody Plans For
HDB resale prices have been running at record levels through 2024 and into 2025, according to HDB's quarterly resale price index. For a young buyer, that has one uncomfortable implication: more of your capital goes into acquiring the flat, which leaves less for the thing that makes it liveable.
Three structural facts make renovation uniquely painful to budget for:
- CPF cannot pay for it. Your Ordinary Account savings can go towards the flat purchase, stamp duty, legal fees and monthly instalments. Renovation is not on that list. It is a fully cash expense.
- It is not covered by your mortgage. Neither an HDB loan nor a bank loan finances renovation. Buyers who need it typically take an unsecured renovation or personal loan, which usually carries a meaningfully higher effective interest rate than a mortgage.
- Quotes are not comparable. One contractor quotes a lump sum, another quotes per foot run, a third quotes per square foot. Without a line-item breakdown, a $45,000 quote and a $62,000 quote can describe the same flat.
The result, according to renovation marketplaces and contractor associations that publish annual pricing surveys, is that a large share of homeowners exceed their initial budget — with change orders and under-scoped wet works the most common culprits.
HDB Renovation Cost by Flat Type: 3-Room, 4-Room and 5-Room
The headline numbers
The single biggest driver of your total is not design taste. It is flat size, followed by whether you are renovating a brand-new BTO or a resale flat with 30 years of someone else's decisions baked into it.
| Flat type | Lean refresh | Mid-range | Comprehensive overhaul |
|---|---|---|---|
| 3-room resale | $18,000–$28,000 | $28,000–$45,000 | $45,000–$65,000 |
| 4-room resale | $25,000–$38,000 | $38,000–$60,000 | $60,000–$85,000 |
| 5-room resale | $30,000–$48,000 | $48,000–$75,000 | $75,000–$105,000 |
| Executive flat (EA/EM) | $40,000–$60,000 | $60,000–$90,000 | $90,000–$130,000 |
| 3-room BTO | $12,000–$22,000 | $22,000–$35,000 | $35,000–$50,000 |
| 4-room BTO | $18,000–$30,000 | $30,000–$48,000 | $48,000–$65,000 |
| 5-room BTO | $22,000–$35,000 | $35,000–$55,000 | $55,000–$75,000 |
Plotted at the midpoint of the mid-range band, the gap between a compact BTO and a large resale executive flat is more than double.
Indicative Total Renovation Cost by Flat Type (SGD, mid-range midpoint)
Note the pattern in that chart: the BTO premium is smaller than most people expect. A new 4-room BTO is not dramatically cheaper than a resale one at the midpoint, because most BTO owners still do full carpentry, aircon, lighting, painting and appliances. What BTO owners save is almost entirely in hacking and masonry — they are not removing anything.
What separates a lean renovation from a comprehensive one
- Lean refresh — repaint, replace lights and fans, install aircon, minimal carpentry, keep all existing tiles and sanitary ware. Common for owners of newer resale flats or BTOs with usable finishes.
- Mid-range — new flooring or overlay, kitchen rebuild, one or both bathrooms re-tiled, full-height wardrobes, false ceiling in living and dining, full electrical overhaul.
- Comprehensive — full hacking of floors and walls, reconfigured layout, new plumbing runs, premium tile and stone selections, extensive custom carpentry, full appliance package.
On a per-square-foot basis, full renovations of resale flats commonly land somewhere in the $60–$120 psf range, while BTO renovations more typically sit around $40–$80 psf — again, indicative bands rather than fixed rates.
Inside a Renovation Quote: Trade by Trade
This is where most budgets are won or lost. Ask for a quote broken down by trade, then sanity-check each line against the benchmarks below.
Hacking and demolition
Hacking is the cheapest trade per square foot and the one that unlocks the most downstream cost. Every wall you remove forces repairs to flooring, ceiling, skirting, electrical points and paint.
- Removing wall and floor tiles in wet areas: roughly $3–$10 psf, depending on tile size, adhesive and whether screed removal is required
- Removing a non-structural partition wall: about $300–$800 per wall
- Removing existing built-in carpentry: about $200–$600 per unit
- Removing existing floor finish or screed: about $1.50–$3.00 psf
- Debris handling and disposal: typically $500–$1,500 for a whole flat
Hacking works in HDB flats must be carried out by an HDB Registered Renovation Contractor. Many interior design firms are not themselves registered and sub-contract this portion, which is one reason two quotes for identical hacking scope can differ by 20 per cent or more.
Masonry, tiling and flooring
- Homogeneous or porcelain floor tiles, laid, with skirting and screeding: about $6–$14 psf
- Wall tiles in kitchen and bathrooms: about $8–$16 psf
- Cement screeding: roughly $3–$5 psf
- Waterproofing membrane for bathrooms: about $600–$1,200 per bathroom, sometimes bundled into the tiling rate
- Vinyl or LVT flooring, supply and install: about $4.50–$8.00 psf
- Laminate flooring: about $4–$7 psf
- Engineered wood: about $8–$15 psf
- Kitchen countertop: solid surface around $80–$150 per foot run; quartz around $150–$250 per foot run
Flooring is the classic false economy. Vinyl over a poor screed will telegraph every hump within a year, and the remedial cost is higher than doing it properly the first time.
Carpentry: the biggest line item
Carpentry is almost always the largest single category in a Singapore renovation, typically accounting for a little under a third of the total. It is also the category with the widest quality variance.
| Item | Indicative rate per foot run |
|---|---|
| Shoe cabinet | $120–$220 |
| Kitchen base cabinet | $150–$280 |
| Study desk | $150–$250 |
| Wardrobe (swing or sliding) | $200–$400 |
| Full-height TV console or bookcase | $250–$450 |
Indicative Carpentry Rates per Foot Run (SGD, midpoint)
Larger fixed pieces are usually quoted as a lump sum: a feature TV wall or console commonly runs $1,500–$4,000, and a platform or storage bed $1,800–$4,000.
The lesson from that chart is arithmetic: a 10-foot wardrobe at the midpoint is roughly $3,000. Three bedrooms of wardrobes plus a kitchen plus a shoe cabinet plus a TV console can push past $20,000 before a single tile is laid. Carpentry is where "we'll just add one more cabinet" becomes a five-figure decision.
Electrical and plumbing
Electrical is quoted per point, which makes it easy to audit:
- Lighting point: $45–$80
- 13A power socket: $55–$95
- Water heater point: $100–$180
- Aircon point: $120–$200
- Distribution board upgrade or replacement: $800–$1,800
- Full rewiring of an older flat: $2,500–$5,000
- Whole-flat electrical for a 4-room: typically $3,000–$6,000
On the plumbing side, sanitary works that involve soil, waste or water pipes must be carried out by a PUB-licensed plumber.
- Toilet bowl installation (excluding the unit): $250–$600
- Basin or sink installation: $150–$300
- Concealed piping replacement: $1,200–$3,000
- Water heater supply and installation: $250–$600
Painting, false ceiling, doors and aircon
- Painting: commonly quoted at $1.50–$3.00 psf, or as a package of roughly $1,600–$3,500 for a 4-room including sealer and two topcoats
- False ceiling: about $4–$8 psf; L-box detailing about $10–$18 per foot run
- Dry partition wall: $800–$2,000
- Whole-flat window replacement: $3,000–$6,000; grilles $300–$800 per window
- Main door replacement: $800–$2,000; bedroom doors $300–$700 each
- Aircon system 3: $2,800–$4,500; system 4: $3,500–$5,500, with trunking and installation sometimes quoted separately at $500–$1,200
- Kitchen appliance package — hob, hood, oven, fridge, washer: $2,000–$5,000
- Sanitary ware and bathroom accessories: $1,500–$4,000
- Curtains and blinds: $800–$2,500
The costs that do not appear in the quote
These are the lines that blow up budgets, and they are rarely in the first quote you receive:
- GST at 9%. Confirm whether every quoted figure is inclusive. On a $50,000 renovation, the difference is $4,500.
- HDB renovation permit fee. Nominal, but usually passed through by the contractor.
- Waterproofing re-testing. If a bathroom fails the water-tightness check, retiling at your cost.
- Lifting charges. Flats without direct lift access on every level can attract a manual-carry surcharge.
- Protection and masking. Usually $200–$600.
- Post-renovation cleaning. Usually $300–$800.
- Contingency. Budget 10–15 per cent on top of the contract sum. On a $50,000 project that is $5,000–$7,500, and it is not optional.
What a Realistic Renovation Budget Looks Like
Here is how a mid-range budget actually distributes across a resale flat, using an indicative $50,000 4-room project as the reference point.
Indicative Breakdown of a $50,000 Mid-Range 4-Room Resale Renovation
And here is the same structure scaled across flat sizes:
| Line item | 3-room resale | 4-room resale | 5-room resale |
|---|---|---|---|
| Carpentry and built-ins | $9,500 | $14,000 | $18,000 |
| Flooring, tiling and masonry | $6,000 | $8,000 | $10,500 |
| Kitchen and bathroom fittings | $4,500 | $6,000 | $7,500 |
| Hacking and demolition | $3,000 | $4,000 | $4,500 |
| Electrical | $2,800 | $3,600 | $4,200 |
| Plumbing and sanitary | $2,400 | $3,000 | $3,500 |
| False ceiling and partitions | $1,800 | $2,600 | $3,200 |
| Doors, windows and grilles | $2,000 | $2,600 | $3,200 |
| Aircon | $2,400 | $2,800 | $3,200 |
| Painting | $1,600 | $2,000 | $2,400 |
| Cleaning, protection and misc | $1,000 | $1,400 | $1,800 |
| Total | $37,000 | $50,000 | $62,000 |
BTO versus resale: where the money actually goes
The BTO-versus-resale decision has a renovation dimension that is easy to underestimate.
On a resale flat in dated condition, hacking, removal, disposal and full re-tiling of floors and two bathrooms can easily consume $12,000–$20,000 of a mid-range budget — money that a BTO owner simply does not have to spend. That differential is real, but it is rarely enough on its own to justify one purchase over the other. Resale flats come with CPF Housing Grants for eligible buyers and are available immediately, while BTOs involve a construction wait of several years.
HDB Renovation Rules That Affect Your Cost
Renovation rules are not bureaucratic noise. Each one has a price tag attached.
Who is allowed to hack
Hacking and demolition in HDB flats may only be carried out by an HDB Registered Renovation Contractor. If your interior designer is not registered, the hacking portion will be sub-contracted, and a margin will be added. Ask directly, in writing, whether the firm is registered — and check the registration against HDB's published list.
The wet areas
Bathroom floor hacking is the most tightly controlled work in the flat. It requires approval, the laying of a new waterproofing membrane, and a water-tightness test before retiling proceeds. Budget $600–$1,200 per bathroom for the waterproofing alone, on top of the tiling. If the test fails, you retile.
Sanitary works affecting soil, waste or water pipes must be done by a PUB-licensed plumber. Electrical work should be handled by a licensed electrician, particularly any distribution board upgrade.
Noise, timing and neighbours
Noisy works — hacking, drilling, demolition — are restricted to weekday daytime hours under HDB's renovation guidelines, and are not permitted on Sundays or public holidays. Exact permitted hours are published in HDB's renovation rules and should be confirmed before your contractor schedules the hacking phase. Getting this wrong can mean stopping mid-demolition, which is expensive.
The things you cannot do at all
- Hack or remove structural walls, reinforced concrete walls, columns, beams, or any load-bearing element
- Alter or obstruct common property, corridor access, or the AC ledge beyond approved limits
- Interfere with the building's shared services
Unauthorised structural alteration is not just a fine. It can trigger rectification orders, and rectifying a wrongly hacked structural element is a five-figure problem.
The Defects Liability Period
New BTO flats come with a Defects Liability Period, usually 12 months from key collection, during which the developer is obligated to fix defects. If you hack out HDB-provided finishes — floor tiles, sanitary ware, doors, windows — you may affect your ability to claim on those specific items. If your BTO has visible defects, lodge them before your contractor starts. It is much harder to prove a pre-existing crack once your renovator has painted over it.
How the process actually runs
The sequencing matters financially. Electrical and plumbing first fix must be completed before false ceilings are up and before carpentry is installed in the kitchen. When trades run out of order, walls get opened again and you pay twice for the same finish.
Your Renovation Timeline, Realistically
For a 4-room resale flat with hacking and two bathrooms, an indicative schedule looks like this:
Two things routinely stretch that timeline: waterproofing tests that fail, and carpentry that arrives late. Both have knock-on effects on your rental period, your interim housing, or your existing lease.
If you are buying a resale flat, you cannot start works before the completion appointment. That gap is exactly the window to finalise design, sign the contract and lodge the permit application, so that hacking can begin on day one of possession. Owners who treat that period as spare time typically lose two to four weeks before the first hammer swings.
How to Avoid Overspending on Your HDB Renovation
1. Split your budget into three buckets. Hard costs — the contract sum — should be roughly 85 per cent of your total. Soft costs — appliances, curtains, furniture, cleaning — take another slice. Contingency takes the rest. Owners who lump everything into one number are the ones who discover mid-project that the washing machine was never accounted for.
2. Compare quotes by line item, never by total. Three itemised quotes will reveal whether a cheaper bid is cheaper because the carpentry is thinner, or because the quote excludes waterproofing. A lump-sum quote that is 15 per cent below the rest is usually missing something, and you will find out after the contract is signed.
3. Decide what you are not doing. If your resale flat's flooring is serviceable, overlaying or retaining it can save a substantial portion of the budget versus full hacking and re-tiling. That decision alone can free up five figures.
4. Do not move walls without a reason. Every wall removal drags along flooring, ceiling patching, skirting, electrical relocation and repainting. A single wall can add several thousand dollars beyond the hacking line itself.
5. Cap your carpentry. Set a fixed dollar ceiling for built-ins and design within it. Interior designers typically earn margin on carpentry, so a vague brief in this category is where budgets drift. Consider off-the-shelf wardrobes in guest rooms, and reserve custom carpentry for the kitchen and master bedroom.
6. Design in standard module sizes. Curved islands, irregular platforms and full-height irregular shelving are charged at a premium because of wastage and labour. Rectangular, standard-height carpentry costs materially less for the same usable volume.
7. Buy your own lighting, sanitary ware and appliances. Retailers run deep promotions during 9.9, 11.11, the Great Singapore Sale and year-end clearance. Buying direct typically beats the contractor's markup, with the caveat that you own any warranty claims.
8. Sequence to avoid rework. Confirm the full electrical and plumbing layout before carpenters start. Every late change that requires opening a completed wall or cabinet is a variation, and variations are where budgets die.
9. Budget for 9% GST explicitly, and confirm inclusion in every quote. This is a $4,500 difference on a $50,000 project, and it should never be a surprise.
10. Remember CPF will not help. Your CPF Ordinary Account cannot be used for renovation. If you need financing, a renovation loan is effectively an unsecured personal loan and typically costs far more than your mortgage. Use it only where the alternative is worse, and model the monthly repayment before signing.
11. Do not skip the contingency. Ten to fifteen per cent, held in cash, untouched until handover. The homeowners who come in on budget are not the ones who planned perfectly. They are the ones who planned for the plan failing.
Can Renovation Boost Your Flat's Resale Value?
Here is the honest answer, and it is not the one renovation contractors advertise: renovation rarely returns dollar-for-dollar at resale. What it does reliably is make your flat easier to sell and give you room to negotiate.
What buyers actually pay for
- A functional, modern kitchen. The kitchen is the single most scrutinised space in an HDB viewing. Cabinets in good condition, a working layout, and clean tiling signal a well-maintained home.
- Bathrooms that are dry and odour-free. Waterproofing that works matters more than the tile pattern. A bathroom that has leaked into the neighbour's ceiling is a resale liability.
- Good flooring in neutral tones. Buyers mentally subtract the cost of replacement when they see worn or mismatched floors.
- Storage that solves the problem. Full-height wardrobes and a well-planned shoe cabinet read as value because they eliminate a purchase the buyer would otherwise have to make.
- No outstanding defects. Cracks, leaking taps, failed light points and damaged grilles all become negotiating chips against your asking price.
What buyers ignore or discount
- Highly personalised design themes that will need to be removed
- Feature walls in unusual materials or colours
- Oversized built-ins that constrain how a buyer can arrange their furniture
- Premium finishes in low-traffic areas
- Trend-driven palettes that date within three to five years
The general rule agents describe is that renovation helps a flat sell faster and supports the asking price, rather than setting it. Two identical units on the same floor, one renovated three years ago and one untouched, will typically not differ by the full cost of the renovation.
The paperwork that protects your value
Keep a renovation file. It should include:
- Contractor and interior designer details, with registration numbers where relevant
- Waterproofing warranty documentation, commonly issued for five to ten years depending on the contractor
- Electrical layout drawings, lighting plans, and plumbing schematics
- Appliance warranties and purchase receipts
- Photos of works at each stage, particularly during first fix
A buyer who can see that the waterproofing was done properly, tested, and is still under warranty is a buyer who is not going to argue $10,000 off your price over a bathroom.
Where to focus if resale is on your mind
| Upgrade | Indicative cost | Resale impact |
|---|---|---|
| Kitchen rebuild with new countertop and cabinets | $10,000–$20,000 | High — most scrutinised space |
| Bathroom retiling and waterproofing | $6,000–$12,000 | High — eliminates buyer risk |
| Neutral repainting throughout | $1,600–$2,500 | High — best cost-to-impact ratio |
| Full-height wardrobes in bedrooms | $3,000–$6,000 per room | Moderate to high |
| Vinyl or laminate flooring replacement | $4,000–$8,000 | Moderate |
| Decorative feature wall | $1,500–$4,000 | Low to moderate |
| Themed or heavily personalised design | Any | Low, often negative |
Note the pattern: the upgrades that pay back are the ones that remove a problem for the buyer, not the ones that express your taste.
One further consideration for HDB owners specifically. Flats sold after the five-year Minimum Occupation Period typically change hands again within a decade. A renovation designed to last fifteen years is being amortised over a holding period that may be half that. Spend where durability and function matter, and be conservative where the appeal is purely personal.
Food for Thought
-
If your renovation budget is roughly the size of your downpayment, which one is actually the investment? Renovation depreciates from the day it is installed. The flat underneath it does not.
-
Are you renovating for the next five years or the next fifteen? MOP rules mean many HDB owners will sell sooner than they expect. Design choices that lock you into a single layout reduce your options in both cases.
-
How much of your carpentry is storage, and how much is aesthetics? If a sizeable share of your budget is going into built-ins, ask what problem each one solves that a $300 off-the-shelf unit would not.
-
Would you rather spend $10,000 on a feature wall or on waterproofing, rewiring and a distribution board upgrade? One of these is invisible at a viewing and one of them is what a buyer's inspector finds.
-
If you had to sell in three years, which half of your renovation plan would you delete? The answer is usually the correct scope for the renovation you should actually build.
The Bottom Line
Renovation in Singapore is not an aesthetic exercise first. It is a cash-flow and sequencing exercise with an aesthetic layer on top. The homeowners who stay in control are the ones who understand that hacking unlocks downstream costs, that carpentry is roughly a third of the bill, that HDB rules around waterproofing and registered contractors have real prices attached, and that a well-documented, functional renovation protects value in ways a decorative one never will.
The figures in this guide are indicative and the market moves — material costs shift, contractor availability changes, and GST has already added nine per cent to every line.
